Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Account codes on MiCollab PC client

Status
Not open for further replies.

Joe King

Technical User
Feb 22, 2017
105
GB
Hi
Has anyone done this, works fine on IP 69xx phones but not MiCollab, i think because you need to press a # to confirm access code and account code. Speed dials wont work as the number to be dialled will change.

any help please.

MiVB and MiCollab both 9.2

Thanks
 
think your out of luck .
i raised a user voice request for something similar - ability to dial dtmf towards door station to activate relay
currently micollab treats that as second call

i suspect that your situation will be the same .

if only micollab was a product that was functional in a real environment .
What mitel need is some PLM's with common sense .




If I never did anything I'd never done before , I'd never do anything.....

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top