Accessing the network via Secure Client (VPN)

[darren77uk]

Hi,

I have just changed over to a Class B subnet on our network, previously the person who had set up the network had our IP range from 200.200.*.*

Now after changing over, our VPN users cannot access the network over VPN.

Are there any issues I should be aware of for VPN authentication!?

Any ideas.

Thanks.

 

[Guest_imported]

Check the routing table on the remote client using route print command from a dos box. It may have the wrong gateway for your office subnet particularly if it uses a router for local Internet access.
Check any local firewall eg Black-Ice is not blocking the new addresses for your office subnet. Check your firewall logs by filtering on source or destinantion matching the remote clients IP address to see if a rule is blocking access.

 

[JohnJiang]

I have checkpoint firewall-1 and VPN installed.....
can anyone show me basic config on policy editor inorder to make
secureclient access ?