accessing mapped drives after VPN connection?

[lhatwwp]

Hello,

Is there a way to cause a logon script(W2K3 server) to run after the cisco VPN connection is made? I would like to have access to the mapped drives on our file server when I'm out of the office and connected through a VPN connection.

If there is a better way to achieve this please let me know.

Thanks,
Lou

 

[unclerico]

Take a look here:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00809f0d75.shtml

I hate all Uppercase... I don't want my groups to seem angry at me all the time! =)
- ColdFlame (vbscript forum)

 

[Supergrrover]

In the VPN client, go to options and use the application launcher to run a script after vpn login.
Just type in the FQDN path to the script on the server or copy it locally and run it from there.



Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[lhatwwp]

Hello,

I tried the application launcher but it fails to launch the application. The log shows the following

2 14:06:38.625 03/14/09 Sev=Warning/3 GUI/0xA3B00002
Application Launcher was not able to launch application "C:\Program Files\Cisco Systems\VPN Client\Logon.vbs".

I also tried to use the option to establish the VPN tunnel before Windsor logon... that didn't work either.

Can anyone make a suggestion?

Thanks,
Lou