I have a BCM50 setup as an SRG and I am trying to figure out how to access a system speed dial from an analog phone. The phone is going to be used when a non-English speaking patient comes into the office. There is no feature key on this phone and I am wondering if there is a way to access system speed dial 001.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Access system speed dial on SRG
- Thread starter khaman
- Start date
Firebird Scrambler
Systems Engineer
From my old Norstar days, it was possible to use the ATA feature code to access it. I thought it might have been something like pressing the recall button on the phone and then *0.
I think the recall button would need to be set for TBR (Timed Break Recall).
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
I think the recall button would need to be set for TBR (Timed Break Recall).
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
SupportDude
Technical User
I don't think Analog phones support System or Personal speed dial.
Speed Dial requires a display telephone.
You could use Last Number Redial.
Call the number you wanted to use for speed dial, and while on the call press Hook Flash *67 to save the number.
Now you can dial the number by pressing Hook Flash *67.
-SD-
Speed Dial requires a display telephone.
You could use Last Number Redial.
Call the number you wanted to use for speed dial, and while on the call press Hook Flash *67 to save the number.
Now you can dial the number by pressing Hook Flash *67.
-SD-
Splic3d
Vendor
- Dec 28, 2012
- 499
This was in the BCM50 doc. System Speed Dial Link *0 (link is usually a hookflash )
<plus the speed dial code>
Allows you to use a speed dial code to quickly dial preprogrammed telephone
numbers. System speed dial codes are established by the System Administrator.
Note: You cannot program personal speed dial numbers from your telephone.
Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
<plus the speed dial code>
Allows you to use a speed dial code to quickly dial preprogrammed telephone
numbers. System speed dial codes are established by the System Administrator.
Note: You cannot program personal speed dial numbers from your telephone.
Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
SupportDude
Technical User
@Splic3d ...
I couldn't find that in the docs, checked BCM and SRG.
I looked at the Analog Phone User Guide, but no joy.
Which doc did you find it in and for what release?
Thanks for the clarification!
-SD-
I couldn't find that in the docs, checked BCM and SRG.
I looked at the Analog Phone User Guide, but no joy.
Which doc did you find it in and for what release?
Thanks for the clarification!
-SD-
Splic3d
Vendor
- Dec 28, 2012
- 499
Sorry guys, was looking at at ATA user guide.
Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question