Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

access other trunks

Status
Not open for further replies.
azrael2000

azrael2000

Technical User
Jun 10, 2008
982
CA
Hi All.

Has anyone ever set up two systems linked with sip trunks so that you can dial a code like 472XXXXXXXXX and use the other ns700's trunks?

Calls extension to extension between the two offices linked with sip trunks work just fine.

Regards
 
Sort by date Sort by votes
are they sip trunks or gateway. if gateway you could use ARS or a different co access code on other system so you can route calls

id sip trunk to sip extension you could do it with trunk access code and dial through the other system
 
Upvote 0 Downvote
The trunks are sip trunks and q-sig.

If you dial the code to get the trunks at the other side, it can't seem to find the trunks.

Regards
 
Upvote 0 Downvote
it has to be setup as a route on the system. when you dial line access code it has to route to the other system
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Wisco33
  • Locked
  • Question
Any other good/recommended on-premise systems?
Replies
2
Views
104
CMUK
CMUK
soshianet
  • Locked
  • Question
NS series Sales Company access
Replies
2
Views
280
kizo
kizo
Mega Support
  • Locked
  • Question
Different GW for SIP Extensions & SIP Trunks NS500 1
Replies
3
Views
132
Mega Support
Mega Support
Peter Kolbe
  • Locked
  • Question
NS-500, SIP Phone, Pickup from Other Phone in Group
Replies
1
Views
114
Peter Kolbe
Peter Kolbe
bmx-2000
  • Locked
  • Question
DECT Roaming/Handover from Cell to Cell with other Handsets then Panasonic? 1
Replies
3
Views
203
bmx-2000
bmx-2000

Part and Inventory Search

Sponsor

Back
Top