Since the ComWins application is the only way to get any alarming information from the HiPath 4000 ver 1, 2 or 3, do you know how the HiPath manager extracts alarms and performance metrics from the HiPath PBX. I was just wondering if there was an API built into the PBX or is there some add-on module that is installed on the HiPath PBX to provide the information to HiPath manager. Any information you could provide would be of great assistance to us in how the HiPath Manager receives the alarms from the HiPath PBX.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Access HiPath 4000 via HiPath Manger
- Thread starter tburke99
- Start date
Similar threads
