Access drive E of my BCM

[BingBang99]

I want to know how to get acces to my BCM 1000 E drive?


Thanks

 

[DigitelD]

You can telnet into it and then access the drive.

SHK Certified (School of Hard Knocks)

 

[biv343]

console cable works as well.

 

[morgansdad]

Be careful what you delete or modify.....

"Its just dial-tone. At the end of the day everyone usually gets to go home.

 

[BingBang99]

I have BRUBack.log in my drive E, any idea for what it is used for?

 

[BingBang99]

I have 94 MB of free space and I need 200 MB for my 4.0 upgrade. Any idea of how do I increas my free space

 

[biv343]

check the e:\ftproot, e:\ftproot\cdrftp folder, and e:\nortel networks\archlog folders. Nothing there should be terribly important.

Outside of that, there isn't much on the E: drive that can be sacrificed. I'd be concerned with that little free space. I saw a system once that had a public IP address and was used for VPN. it had default passwords on it and the FTP server was taken over and used as a hackers repository. That filled up the E drive really quick. Not to mention it made the customer more security conscious.

 

[DigitelD]

I have seen where in ftproot it is empty. I had to look and find other cdr files to delete.

SHK Certified (School of Hard Knocks)

 

[macdouglas]

I just had the same problem. When loading a patch, i had f: drive issues. an entire system backup was in the f:root.
go to BRU and make sure you don't have any back-ups lurking.

A ship in the harbour is safe, but that's not what ships are for.

 

[xtract]

be carefull on what you delete on the drives some of the folders and logs are needed for back and restore,if you are backing up the system the scripts will look at the folders and if they cant see it the back up fails and worst it will stop the services.