Access 97 to 2003 Report Problem 1

[carpediem79]

I am currently having a problem with an access97 databse. We just switched to 2003. The database opens up ok, but the reports are the problem. We cannot open them, edit them, design, preview, NOTHING. Converted or not converted, they do not work.

Any thoughts or ideas?

Thanks!!

 

[carpediem79]

To add to this, I just tried this database on another computer and it works fine.

I assume there is some setting that is causing the problem. Any ideas?

 

[carpediem79]

solved the problem. After some research, the printer, which DOES work, that was set as default was causing the problem.

I had the person switch to another printer and it works fine now.

 

[EPT]

I would check for missing or broken references

 

[SeeThru]

Hmmm....give yourself a star!

Thanks for posting the solution.

 

[assets]

The problem is 97 is different. When I went from 97 to 2002 I converted it to 2000 first. then fro 200 to 2002(3) and it solved the problem

Never give up never give in.

There are no short cuts to anything worth doing