Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Access 500 in NPR status with Hipath 4000 V7

Status
Not open for further replies.

persi01

Technical User
Sep 14, 2017
32
IN
hi guys,

Have to reinstall the Access 500 with survibiality feature dues to continuous rebooting.
But Access 500 is not getting SYNC with main OS4000 Ver7 & showing NPR status.
Then run exec-ussu:confap,17; still softgate is down.
Does some commands need to be entered at 4K end to initiate the synchronisation.


 
Hi.

ACTIVATE-USSU:UNIT=LTG,LTU=17;

Service SOCO:
/etc/init.d/socod start
/etc/init.d/socod status

Logs:
/var/opt/soco/logs

For changes :
exec-USSU: updatap,....;
 
Make a tcpdump on either the 4K or the Access 500 (or both) and filter on the 4K active processor SIPCO address or Access 500 signalling IP. Does the SYN reach the Access 500? What is the response?

When you reinstalled the Access 500 did you make any changes to the XML that you created from the original install ?
 
XML file was having issue. LAN IP address of Access point 500 was incorrect.
Thanks for the replay.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top