Accesing remote site over VPN

[jay1983]

Hello,

We are running in to an issue when trying to access our remote sites over VPN. The following is a basic setup of our configuration

Site A - 192.168.18.x (Cisco Pix)
Site B - 192.168.14.x (Cisco ASA)
Site C - 192.168.20.x (Cisco Pix)

What we want to be able to do, is connect in to Site A with the Cisco Systems VPN client and be able to access the devices on Site B and Site C.

If we VPN in to each site separately we can access the devices, however we want to switch to a more centralized setup where users would only have to connect to 1 office and still be able to access the devices across all 3 sites.

 

[imbadatthis]

you'll need to have either permanent vpn connections between the sites and main office:

setup hub and spoke - 3 GRE tunnels total. one for each site to main Office. with proper routing setup this should give access to all three sites. you'll need route injection OR just a default route on the sites to main office.

IF DATA costs are too much for such setup , then an on demand design could also work. use access-lists to trigger packetbase request to other locations.

you can top the GREs with IPSEC for security.

We must go always forward, not backward
always up, not down and always twirling twirling towards infinity.