AC41 Server cannot run in NT service mode

[tamachi]

Hi all,
I tried to run AC41 Server (Windows2000 service mode).
But It cannot run, but AC41 Server GUI can run properly.
Please anyone tell me how to do it.
Are any considerations required to do ?

My environment
1.AC41 Server moduled is installed and configured
in the same PC as DB Server.
The service account of AC41 Server is default Administrator account.

2.spec
OS:Windows2000 Server SP3
AC build 4.11
Oracle9.01 workgroup

tamachi

 

[Jasonic]

tamachi

Firstly, when you connect to AC Server have you checked the box use for connection mode?

Secondly, once the checkbox has been set (Ticked) then go to the control panel and select services, find the AssetCenter Server service and start the service.

You'll need to set the automatic startup paramters within the properties of the service.

This should help.

Jason Thomas
AssetCenter Consultant

http://www.corviz.com

 

[tamachi]

HI! Jason
Thank you for your help.

Since the contents of a question were unsuitable,
it arranges.
In my environment which does not move well, as long as the detailed information on the help of ACServerGUI is seen, in auth code,
it is not connectable with DB because the MAC Address cannot recognize exactly.
(The subsequent plan which has not been improved although I had the recurrence line carried out by with that right which the mistake of an auth code also has has no now)
In temp code, since MAC Address is unrelated, it is connectable with DB .
Moreover, it can connect in auth code and moves in GUI mode.
Before Oracle service starts another at the time of boot of PC, AC Server starts it previously and it has the problem which does not make automatic connection of the ACServer at DB. (It does not work, even if it sets up lithograph rye at the time of the error of service execution) Furthermore, if GUI mode is also stopped for DB backup of service of Oracle9i, even if it will start, it is not connectable with 2 times and DB. (It is automatic execution at a schedule) For this reason, I reboot Windows Server automatically after an OracleDB backup end, and am performing ACServerGUI automatically in command mode at the time of Windows automatic login.
How are other you employed?

a long letter -- becoming -- I am sorry, it came out and carried out
tamachi