WrongWayFeldman
IS-IT--Management
How can I tell if a cs1000 is an AC switch or a DC switch from command line in a telnet session to the PBX?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Ac or DC Switch, that is the question?
- Thread starter WrongWayFeldman
- Start date
- Status
Firebird Scrambler
Systems Engineer
That's not going to be easy, but you can narrow it down in LD 22.
Use the commands
ISS
ISSP
TID
SLT
However, you would be wise to get someone to take a photo of the phone system. It makes it much easier.
Firebird Scrambler
Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer
Website = linkedin
Use the commands
ISS
ISSP
TID
SLT
However, you would be wise to get someone to take a photo of the phone system. It makes it much easier.
Firebird Scrambler
Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer
Website = linkedin
- Status
Similar threads
- Locked
- Question
- Locked
- Helpful tip