about fail fhwr 44

[jftg73]

HI I HAD SEEING THAT MY PBX IS PRINTING THE ERR OVL111 FHWR 44 I HAD CHECKED AND SAW THAT CARD DTI IS FAILED BUT I REMOVE THE CARD FOR THER AND TELL ME THE SAME I REMOVE THE CARD QPC414C AND I CAN´T ENABLED MY DTI2 AND THE MESSAGE IS STILL.

SOME IDEA?
THANKS

 

[mluckie1]

The OVL111 only means another person under the name FHWR is logged in. When logged in at the > prompt type "WHO" and enter this will tell you if they are still logged in. You will need to reseat the QPC414C card to enable the DTI card (QPC720 I assume)

 

[jftg73]

ok but i did the reset of the card qpc414c and tle ld 60 is still in my tty02, i will try get a ini to system pbx

 

[mluckie1]

If you know the pwd2 and use that to login. You can use "FORC #" # the tty number. This will forc the other user to log out. If not try the "SEND #"(# is tty number) then enter a message and hit return. Good luck.

 

[jftg73]

I DID TRY WITH FORC 2 AND DON´T GET NOTHIN TELL ME FORC NOT ALLOWED/OVERLAY NOT ABORTED

WAS MORE EASY DOWN THE POWER AND TURN ON THE PBX?

 

[mluckie1]

If the FORC command at the ">" does not work then you were not logged in under the second level password (pwd2).

 

[jftg73]

I DID A SYSLOAD TO SYSTEM AND NOW IS WORKING GOOD, I TRIED THE PROMPTS FORC AND SEND WITH PWD2 AND IS WORKING GOOD, THANS FOR YOUR HELP.