About configuring ISND BRI S/T....need help please

[Petazetas754]

Hi I have a 1760 Router a 6 iphones (2port FXO,ISDN BRI,FXS)
and Callmanager Express 3.0

I want a voice call from ISDN BRI S/T to be routed to one iphone for example
the one with number 006"



Please ,can you explain with a little EXAMPLE the theme of put my isdn number "942291236" with my phone numbers? that are 001 002
003 004 005 006, my configuration is:

Cisco1700#show config
Using 2725 out of 29688 bytes
!
! Last configuration change at 07:02:16 GMT Sat Oct 2 2004
! NVRAM config last updated at 07:02:51 GMT Sat Oct 2 2004
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Cisco1700
!
logging queue-limit 100
enable secret 5 $1$oZoY$O.Bc9D2rmbOXALtZGAusz/
enable password telematica
!
clock timezone GMT 1
ip subnet-zero
!
!
!
ip dhcp pool dynamicserver
network 128.100.0.0 255.255.0.0
option 150 ip 128.100.110.40
default-router 128.100.110.40
!
!
isdn switch-type basic-net3
!
!
!
!
voice class h323 1
!
!
!
!
!
no voice hpi capture buffer
no voice hpi capture destination
!
!
mta receive maximum-recipients 0
!
!
!
interface FastEthernet0/0
ip address 128.100.110.40 255.255.0.0
speed auto
half-duplex
!
interface BRI0/0
no ip address
isdn switch-type basic-net3
isdn incoming-voice voice
!
interface Serial1/0
no ip address
shutdown
!
interface Serial1/1
no ip address
shutdown
!
ip classless
ip http server
ip http path flash
!
!
!
!
snmp-server community public RO
snmp-server enable traps tty
call rsvp-sync
!
voice-port 2/0
cptone ES
connection plar 005
!
voice-port 2/1
connection plar 005
!
voice-port 3/0
!
voice-port 3/1
!
!
mgcp profile default
!
dial-peer cor custom
!
!
!
dial-peer voice 1 pots
incoming called-number 005
destination-pattern 9
port 2/0
!
dial-peer voice 2 pots
destination-pattern 007
port 3/0
!
!
telephony-service
load 7905 CP79050101SCCP030530B
max-ephones 24
max-dn 120
ip source-address 128.100.110.40 port 2000
create cnf-files version-stamp 7960 Oct 02 2004 06:54:53
max-conferences 6
web admin system name telematica password telematica
dn-webedit
time-webedit
!
!
ephone-dn 1 dual-line
number 001 no-reg both
name Telematica1
hold-alert 30 originator
!
!
ephone-dn 2 dual-line
number 002 no-reg both
name Telematica2
hold-alert 30 originator
!
!
ephone-dn 3 dual-line
number 003 no-reg both
name Telematica3
hold-alert 30 originator
!
!
ephone-dn 4 dual-line
number 005 no-reg both
name Telematica5
hold-alert 30 originator
!
!
ephone-dn 5 dual-line
number 006 no-reg both
name Telematica6
hold-alert 30 originator
!
!
ephone-dn 6 dual-line
number 004
name telematica4
!
!
ephone 1
mac-address 000D.EDAB.653A
button 1:1
!
!
!
ephone 2
mac-address 000D.EDC3.6723
button 1:5
!
!
!
ephone 3
mac-address 000D.EDAB.6327
button 1:3
!
!
!
ephone 4
mac-address 000E.386E.DD9B
button 1:2
!
!
!
ephone 5
mac-address 000D.EDAB.648C
button 1:4
!
!
!
ephone 6
mac-address 000E.386D.D29B
type 7905
button 1:6
!
!
!
line con 0
speed 115200
line aux 0
line vty 0 4
password telematica
login
!
ntp server 128.250.36.2
end

Some advice?

Is there any special command for the isdn, to route calls?.....


Thanks a lot

 

[computerhighguy]

Assuming the BRI interface is up, I would try the following

Create a voice port 0/0/0 and 0/0/1 for the 2 channels of the BRI. Then setup the connection plar command like the others.


It is what it is!!
__________________________________
A+, Net+, I-Net+, Certified Web Master, MCP, MCSA, MCSE, CCNA, CCDA, and few others (I got bored one day)

 

[ccmuser]

What excacly do you want to do? have your ISDN line ring on just one line? all lines? Hunt group?

 

[Petazetas754]

Yes i have my isdn line and bri active and configurated,

But when i try to configurate the ports of isdn bri s/t, i cant because 1760 router only let me configurate voice ports that are FXO and FXS....

More ideas...