Abb. numbers problem

[VMPOP]

hello

i have a case where i want to connect a paging system via extension coming from MD110 BC12SP6, i programmed the ABB numbers as follows:

ADCOI:ABB=527,TRA=315527,CLASS=3;

where 351 is the extension number analog
527 is the user number for a single paging device

the system will prompt you when calling directly to enter user number and a 3 digit message and that will complete your paging request.

what i want is to translate the sequence of dialling using ABB. numbers i did it before with BP250 and it worked fine, but with MD110 no success, i only get the prompt from the begining when i dial 527, seems no DTMF digits where sent, i tried to use D, E, C in TRA paramter and no hope also.

ADCOI:ABB=527,TRA=315D527,CLASS=3;


i wish i get a good solution for this problem.
cheers


East Or West Google Is The Best

 

[whosrdaddy]

this won't work. try with a direct link (E&M) tot he paging system

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!