AAU access agent

[TeleLion]

I cant login in to an MD110 BC11 through the AAU:
Login: root
Password:

BaseSystem, Copyright (c) Ericsson Business Networks AB 1994, 1995
pSOSystem Copyright (c) Integrated Systems, Inc., 1992.
Welcome to BaseSystem...

$ tncomm mml
tncomm: Command not found
$

any one know where i cant start to fix this?

 

[unknown1]

The command you can find in your startup file ($cat startup) is "tncom" and not "tncomm" !

 

[kanecCZ]

telnet ip address
root
passw

config

M Modify

STARTUP MODE
1.Run the SOFT image

C Continue

reset

 

[TeleLion]

Am using WINFIOL TCP/IP t connect to the AAU, it will not give me the option to Run the soft image, it goes directly to Network interface parameters:

$ config
HARDWARE RELATED PARAMETERS:
Board serial number: A62 0001643
Board revision: AGENT K2 ROF 137 5411/2 R1A
Flash file system device size: 2048 kBytes
Ethernet MAC address:
NETWORK INTERFACE PARAMETERS:
Ethernet IP address:
Ethernet subnet mask: 255.255.255.192
Ethernet Maximum Transmission Unit: 1500
PPP interface is disabled
Default gateway IP address:
Automatic log-off disabled
Console print-outs enabled

(M)odify any of this, (C)ontinue or (A)bandon changes? [A] M

For each of the following questions, you can press <Return> to select the
value shown in braces, or you can enter a new value.


NETWORK INTERFACE PARAMETERS:
Use Ethernet interface? [Y]

 

[whosrdaddy]

when you do config via telnet, don't use the ENTER key, use key combination CTRL-J instead.

Cheers,
Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[TeleLion]

Tried the CTRL-J same thing, configration goes directly to netwrok interface parameters.