Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

AAstra Mx-one telephony server

Status
Not open for further replies.

Pratap Singh

Technical User
Aug 3, 2016
1
JE
we are using mx one tsw and we want to upgrade to the mx telephony server, we have more than 500 dect user ,i want to know that this existing dt 690 will work with mx telephony server because i want to install the ip dect base station. i need the follwoing information.
1 . Can we use the exsitnig DECT 690 with ip dect base station.
2 . How many ip dect base station can be installed , what is the condition.
3 . how we can synchronisation between two base station ie handover off call will take place oor not.

Please help me for full detail.

basicaly we want to buy this telephony server only for DECT phone coverage.
 
if you are getting an MXONE 6.1

- DT690 are supported
•Max. 1000 users / Master
•Max. 20 000 users / Pari Master
•Max. 100 Masters / Mobility Master
•Max. 10 Mobility Masters / System
•When the system ID used in the installation is between 1 to 36:
Max. 1023 IPBS per Pari Master
•When the system ID used in the installation is between 37 to 292:
Max. 127 IPBS per Pari Master
•When the system ID used in the installation is between 293 to 296:
Max. 2047 IPBS per Pari Master
In large systems with system ID 293 to 296, the Radio should be disabled in the Pari Master. Also, with the exception for the Pari Master role, no other roles (for example Crypto Master, Kerberos server, etc.) should be activated in the Pari Master.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top