Aastra Dect problem with disconnect and no ring signal when calling a dect,

[artikar]

Hei.

I have a problem with Dect and when i used number 131, if i change to another number like 191 everyting is OK

The problem is that the Dect phone does not always ring when i call 131, and if it ring and the phone is answered , the call been disconnect.
When i call the 131 i see i SUSIP:dir=131; that the call i startet but no signal in the Dect..

If i change the number from 131 to 191 , everything is OK:
I have tried to reset unit CTLP and removed the postbox this user have in Onebox,( dosent used it, and i tried to removed to see what if that will solved the problem, but not..


CALENDAR DATA
IDENTITY=IPA-07-0824
VERSION=CXP1010107/4/TSWSP04/R5A
15:14:52
WED 13 FEB 2013

<SUSIPIR=131;
STATUS INFORMATION AT 15:08:06 13FEB13
DIR TYPE TRAFFIC STATE/PTR LINE STATE/PTR DIV STATE ADD INFO
131 CXN START CALL #003A ASSIGNED #03DC PEN LIST=1


END

Thanks and regards
Per-A

 

[doktor]

Check these TTY commands and post the result here:
CXAKPIR=131&191;
GEDIPIR=131&191;
CXRFP:FPI=ALL,RPN=ALL;
CXCFP:FPI=ALL;
remove the personal calling list from the DECT handst with #10#, and re-try to call.

///doktor

 

[artikar]

Here is the data,

i have use the 131 with pelpi to 131 for 2 days now, and the customer has no problem ..

I belive there is someting with the number 131.


CORDLESS EXTENSION AUTHENTICATION KEY DATA



DIR AUTKEY IPEI ACCESS RIGHTS

191 - - CONFIRMED

END



<

DIRECTORY NUMBER PROFILE


DIR LIM CSP CUST LANG MCOST BSEC


131 1 0 1 0 - 0

191 1 0 1 0 - 0



END



< CXRFP:FPI=ALL,RPN=ALL;



CORDLESS EXTENSION RADIO FIXED PART DATA





FPI = 1 BPOS = 001-1-50



RPN OPERATING STATE BLOCKING STATE

1 OPERABLE NOT BLOCKED

2 OPERABLE NOT BLOCKED

3 OPERABLE NOT BLOCKED

4 OPERABLE NOT BLOCKED

6 OPERABLE NOT BLOCKED

7 OPERABLE NOT BLOCKED





FPI = 2 BPOS = 001-1-60



RPN OPERATING STATE BLOCKING STATE

1 OPERABLE NOT BLOCKED

2 OPERABLE NOT BLOCKED

3 OPERABLE NOT BLOCKED

END



<

CORDLESS EXTENSION COMMON FIXED PART DATA

SARI = 10B2403C





FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE ACDM COMP

1 001-1-50 10B2455D 6 0 0 RING MASTER 01111 NORM NO 0

2 001-1-60 10B2455E 3 0 0 RING MEMBER 01111 NORM NO 0

END





PERSONAL NUMBER:131


LIST CHO ANSPOS TIME BSYCHO ONECAL ORGSEL SMSSEL


1 1 191 45 - 1 111 0

1 2 097127041 45 - 1 111 0






END <


Per-A

 

[doktor]

Thanks.
I also need the GEDIP:dir=131&191;

///doktor

 

[doktor]

And the GETSP:CSP=0;
I think bot extension use CSP=0?
Also relevant alarms: ALLOP; and HIEDP;(HIMDP

If the files are too big, see my details in:

http://www.kandu.dk/spg97163.aspx

///doktor

 

[artikar]

Hello.

I removed all programming on 131 with.
cxake
pelpe
gedie
nanse:numtype=ex,numse=131;
nansi:numtyp=ed,numse=131;
nanse:numtyp=ed

And program everything back ,
start with nansi:numtyp=ex,numse=131,

Now is everything ok, possible there was something with the number 131, i dont now but now evereything is ok now.

Thanks

Per-A

 

[doktor]

Takk for opdateringen av problemet ditt.
Thanks for your status update.

///doktor