dig123456789
Technical User
Anyone know of a way to get an aastra phone to pull down an updated company directory csv without rebooting the phone?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
AASTRA 6731i Phone Directory - Resync?
- Thread starter dig123456789
- Start date
- Status
Hi,
have you tried it with the function "auto resync" in the config-file ??
auto resync mode: 3 #The terminal will check for new FW or configuration (aastra.cfg/mac.cfg) every day..
auto resync time: 03:00 #at the time specified OR when the terminal has made a reboot/reset
and set also "directory 1..." in the config-file :
directory 1: tftp://10.30.102.158/path/companylist.csv
An Administrator can enable Auto-Resync using the configuration files or the Mitel Web UI. In
the configuration files you set the following parameters:
• auto resync mode - Determines whether the configuration server automatically updates
the phone’s configuration files only, the firmware only, both the firmware and configuration
files, or disables automatic updates. This parameter works with TFTP, FTP, HTTP, and
HTTPS servers.
• auto resync time - Sets the time of day in a 24-hour period for the IP phone to be automatically
updated. This parameter works with TFTP, FTP, HTTP and HTTPS servers.
maybe this can help you don`t to reboot the phone.
best regards,
Norbert
have you tried it with the function "auto resync" in the config-file ??
auto resync mode: 3 #The terminal will check for new FW or configuration (aastra.cfg/mac.cfg) every day..
auto resync time: 03:00 #at the time specified OR when the terminal has made a reboot/reset
and set also "directory 1..." in the config-file :
directory 1: tftp://10.30.102.158/path/companylist.csv
An Administrator can enable Auto-Resync using the configuration files or the Mitel Web UI. In
the configuration files you set the following parameters:
• auto resync mode - Determines whether the configuration server automatically updates
the phone’s configuration files only, the firmware only, both the firmware and configuration
files, or disables automatic updates. This parameter works with TFTP, FTP, HTTP, and
HTTPS servers.
• auto resync time - Sets the time of day in a 24-hour period for the IP phone to be automatically
updated. This parameter works with TFTP, FTP, HTTP and HTTPS servers.
maybe this can help you don`t to reboot the phone.
best regards,
Norbert
- Thread starter
- #3
dig123456789
Technical User
That's a good idea. I'm looking it now. Thanks!
- Status
Similar threads
