Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

AAR Analysis question

Status
Not open for further replies.

JJacobs313

Technical User
Apr 26, 2013
185
US
I have some DECT phones, that need to take a specific route pattern, so originally it was programmed per extension. Now I need to bulk add. For example 4100-4199. In the aar analysis I tried to put in 41** and 41xx, but neither are working. Is this possible, or will I need to add each extension on its own? CM 6.2.

"I am learning all the time. The tombstone will be my diploma." - Eartha Kitt
 
no, you should just grab the most exact match left to right. With ARS and AAR there's location tables and the 'all' table. You'll always use your location table unles a more exact match exists in the 'all' table.

code 4, min/max 4, grab route 4
code 41 min/max 4, grab route 5

that would make all the 4000's grab route 4 except 4100-99

 
That is what I thought. I will have to look into this more. Here is what I have, I need all the 41xx and 42xx to follow the same route of 950, but this doesn't seem to work:
aar_menjfx.png


"I am learning all the time. The tombstone will be my diploma." - Eartha Kitt
 
I have also tried it with just 41 no xx and no **, still a no go. This is on my all locations.

"I am learning all the time. The tombstone will be my diploma." - Eartha Kitt
 
NVM got it, thanks!

"I am learning all the time. The tombstone will be my diploma." - Eartha Kitt
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top