kunz12
MIS
- Jan 17, 2007
- 42
Hi Folks -
I've configured command accounting (tacacs+) on an ASA 5520 but don't see any commands logged on the reports for tacacs+ accounting.
Here's the configuration of AAA on the 5520:
aaa accounting enable console AEM_Access
aaa accounting ssh console AEM_Access
aaa accounting telnet console AEM_Access
aaa accounting serial console AEM_Access
aaa accounting command AEM_Access
The server group AEM_Access has two servers defined which are running Cisco ACS. The version of Cisco ACS I was running had a bug with command accounting. I applied the patch that supposedly fixes the issue. But still no luck.
Essentially I want to record all the commands that are typed in by different admin's working on the ASA.
Any help would be appreciated.
I've configured command accounting (tacacs+) on an ASA 5520 but don't see any commands logged on the reports for tacacs+ accounting.
Here's the configuration of AAA on the 5520:
aaa accounting enable console AEM_Access
aaa accounting ssh console AEM_Access
aaa accounting telnet console AEM_Access
aaa accounting serial console AEM_Access
aaa accounting command AEM_Access
The server group AEM_Access has two servers defined which are running Cisco ACS. The version of Cisco ACS I was running had a bug with command accounting. I applied the patch that supposedly fixes the issue. But still no luck.
Essentially I want to record all the commands that are typed in by different admin's working on the ASA.
Any help would be appreciated.