AA answering for all CCR tree target lines

[alvarius]

I have a MICS 5.0 and have programmed 3 CCR trees. Under F983, I assigned the appropriate tables for the lines and they did work. Line 242 (target DID line), for example, was assigned to table 2. This was working earlier in the day when I first tested it. Now I am getting all three of my CCR DID's answered by the main AA greeting (greeting 1, table 1). This makes some sense because lines 25-48 from my T1 are assigned to table 1. But if I set lines 25-48 to not be answered, I then lose my AA. How do I get my CCR DID's to be picked up by the appropriate table without being intercepted by the main AA greeting? I have tried just about everything - turning everything off under F982, DRT to prime = No, setting everything to manual. I must be missing something simple here. Can someone throw me a rope before I experiment too much with the system?
Thanks in advance.

 

[phoneguy427]

Are you using night service? If so set the control set for the line to the prime extention.

When in doubt RTFM (read the friggin manual)

 

[RikRodgers]

I assume you're using a PRI and not a T-1, correct? Program your DID's by target number to be answered by the appropriate table, and set lines 25- to answer:no.

On the other hand, if you are using a T-1, and a separate DID card, ignore everything I just said; your DID calls aren't riding the T-1 anyway.