AA and F506

[econotel]

Been a while since I programmed AA usually it is pretty simple.

I am trying to set up AA using PMVS-3. When I enter F506 all it offers me is ALWAYS or DELAYED it does not offer the number of rings I want to program.

What am I doing wrong? Do you have the step by step. Could my PROC not support AA. I am able to dial into VM via 777.

 

[econotel]

P.S. I am using an ACS PROC. Sticker is not on the front so I am not sure what version PROC.

 

[ttech]

Anything older than ACS R3 supports only immediate and delayed. R3 and newer support number of rings

Do a feature 59 and let us know what release you have.

 

[TouchToneTommy]

You have a Partner Plus, Partner II, or Partner ACS R2 or earlier.

Get the documentation from

http://support.avaya.com

and read up on it.

 

[econotel]

This must be the first time I have worked on anything less than a Partner R6 so this must be the reason.

 

[econotel]

What are the set up instructions for AA for versions less than R3?

 

[ttech]

AA is the same, just you can do immediate call handling or a fixed delay. You just cannot set the number of rings delayed ring is.

 

[econotel]

Thanks. Yes, I got it to work. Seems that the PMVS R3 only have basic AA features, no submenus, centrex transfer, info. or company dir..