A406 REPEATER WITH CELL STATION

[AJ22]

Guys i have a site where customer is looking for dect solution but does not want to go to the expense of putting cells everywhere. I have been looking at the a406 repeater but would this work to repeat the signal from a cell? If so could i repeat the singnal from repeater to repeater or would it have to be CELL then REPEATER in each area?

I know this is not ideal but just looking at cheaper alternatives and if would actually work.. ?

Cheers again

 

[WhiteGooner]

Hey,

You can add 6 A406's to 1 cell, it just repeats signal, depending on how many handsets you have it may cause an issue, but depends on the dect cell used and channels available.

 

[AJ22]

Ok Cheers for the info!

I was planning using ns0154 IP Dect cell stations, should they work ok with that cell?

 

[WhiteGooner]

Yes

 

[WhiteGooner]

Dont forget you will require a DSP to use that particular Cell.

 

[AJ22]

OK Thanks, is this a DSP Module within the 406 yes?

 

[WhiteGooner]

What Panasonic system are you planning to put the 0154 on?

 

[AJ22]

NS700, this will have have a DSP card installed. Sorry I understand what you mean..