a duplicated control system

[wfhy]

Hi all freinds,

I have a duplicated control system MD110 with BC12 SP7.
After runing a week, DUSYI command can not be excutived.

I have some quistions as follows:

--Why LPU5's servise state is both active?
--How do I understand 1-0-73 and 1-1-73 should be no equipped?

<DCSSP;
CONTROL SYSTEM INFORMATION

LIM CSSIDE A CSSIDE B BLOCKWORD
1 EXECUTING STANDBY

BLOCKWORD:
B0= MANUAL
B1= FAULTMARKED
B2= SYSTEM
B3= UNLOAD
B4= INTERNAL
B5= LOADBLOCK
B6= NO CONTACT
B7= VACANT
END

<CNLIPEV=YES;

LIM CONFIGURATION
LIM NUMBER 1
LIM CONTROL LIM CONTROL NUMBER OF SERVICE
SYSTEM SIDE SYSTEM STATE PCM-LINKS STATE LIM
A EXECUTING 0 ACTIVE
B STANDBY
MEMORY MEMORY MEMORY SPARE
VOLUME SPARE AFTER PACKING
65535 KB 11611 KB 11611 KB
BUAR1 3799 KB BUAR2 2940 KB

DEVICE BOARDS
NUMBER OF
BPOS BOARDID INDIVIDUALS SERVICE STATE
001-0-00 NOT EQUIPPED
001-0-01 NOT EQUIPPED
001-0-02 NOT EQUIPPED
001-0-03 NOT EQUIPPED
001-0-10 102 32 ACTIVE
001-0-20 NOT EQUIPPED
001-0-21 NOT EQUIPPED
001-0-22 NOT EQUIPPED
001-0-23 NOT EQUIPPED
001-0-30 NOT EQUIPPED
001-0-31 NOT EQUIPPED
001-0-32 NOT EQUIPPED
001-0-33 NOT EQUIPPED
001-0-40 99 4 PASSIVE
001-0-41 NOT EQUIPPED
001-0-42 87 16 ACTIVE
001-0-50 87 16 ACTIVE
001-0-52 106 16 ACTIVE
001-0-60 106 16 ACTIVE
001-0-62 96 1 ACTIVE
001-0-63 20 1 ACTIVE
001-0-70 42 32 ACTIVE
001-1-00 57 32 ACTIVE
001-1-10 102 32 ACTIVE
001-1-20 77 16 ACTIVE
001-1-22 NOT EQUIPPED
001-1-23 NOT EQUIPPED
001-1-30 NOT EQUIPPED
001-1-31 NOT EQUIPPED
001-1-32 NOT EQUIPPED
001-1-33 NOT EQUIPPED
001-1-40 NOT EQUIPPED
001-1-41 NOT EQUIPPED
001-1-42 NOT EQUIPPED
001-1-43 NOT EQUIPPED
001-1-50 87 16 ACTIVE
001-1-52 87 16 ACTIVE
001-1-60 87 16 ACTIVE
001-1-62 20 1 ACTIVE
001-1-63 20 1 ACTIVE
001-1-70 42 32 ACTIVE
001-2-00 57 32 ACTIVE
001-2-10 102 32 ACTIVE
001-2-20 77 16 ACTIVE
001-2-22 NOT EQUIPPED
001-2-23 NOT EQUIPPED
001-2-30 NOT EQUIPPED
001-2-31 NOT EQUIPPED
001-2-32 NOT EQUIPPED
001-2-33 NOT EQUIPPED
001-2-40 NOT EQUIPPED
001-2-41 NOT EQUIPPED
001-2-42 NOT EQUIPPED
001-2-43 NOT EQUIPPED
001-2-50 NOT EQUIPPED
001-2-51 NOT EQUIPPED
001-2-52 87 16 ACTIVE
001-2-60 87 16 ACTIVE
001-2-62 76 8 PASSIVE
001-2-63 76 8 PASSIVE
001-2-70 76 8 PASSIVE
001-2-71 76 8 PASSIVE
001-2-72 20 1 ACTIVE
001-2-73 NOT EQUIPPED


best regards
wfhy

 

[whosrdaddy]

--Why LPU5's servise state is both active?

this is normal, as one LPU can go down, the other one must kick intoaction immediatly, ACTIVE state means that the board is "configured/programmed".

--How do I understand 1-0-73 and 1-1-73 should be no equipped?

these bpos are marked as "LPU" in older magazines
since you have the LPU in 1-0-70/1-1-70 with 32 timeslots, you can't use 1-0-73 anymore

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[wfhy]

Thank you, Whsrdaddy
I remember that one LPU'S state is active and another is standby in MD110 with bc3 so ask the quistion.
Thank you again!

 

[whosrdaddy]

that's why we have the dccsp command...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!