Windows XP; HP Deskjet 722C - Am I facing the end of a long, trouble-free relationship with my 722C? Printing color results in only black and pink; new cartridge (tried 2 different ones); cleaned the cartridge per HP's Services tab; nada ... still only black and pink. Is there something else I should know about solving this? Many thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
A Colorful Death?
- Thread starter hikermann
- Start date
goombawaho
MIS
I would take a slightly damp piece of paper towel and touch each cartridge to it. Do you get ink from each color?? If so, the ink is flowing out of the cartridge (not blocked or empty).
Then you have to look at the print head.
I wouldn't put too much effort or money into it. Much better/faster printers are available at this point.
Then you have to look at the print head.
I wouldn't put too much effort or money into it. Much better/faster printers are available at this point.
FredWagner
MIS
hikermann - This is an older printer with a parallel port. Have you tried a new parallel cable ?
Fred Wagner
(retired, but still involved!)
Fred Wagner
(retired, but still involved!)
- Status
Similar threads
- Locked
- Question