96xx DHCP Vlan 1

[avAyATEKky]

I am having an issue, I have 3 floors all 3 has its own voice vlan. The DHCP does what its suppose to do(what i think).
Now when I take a phone from floor 1 to floor 2 the dhcp does not boot the phone to the 2nd floor dhcp scope. I have to manually clear/reset the phone.

The headache is when I have a whole group moving between floors I have to clear/reset 50 phones. Is there a way where when the phone is move to another switch with a different dhcp scope can the phone clear its own previous settings and upload the new scope. I need all the info I can get.

the scope
option-242 "MCIPADD=3 clan address,MC PORT=1719,HTTPSRVR=x.x.x.x,HTTPDIR=46xxsettings.txt, L2Q-1, L2QVLAN-that floor";

Today Makes Tomorrow

 

[kyle555]

Do you have VLANTEST specified in the data scope? It specifies how long (in seconds) a phone will startup tagging on the old voice vlan. VLANTEST=0 means that once a phone gets a voice VLAN from the data scope once, it will retain it forever.

So that is one potential hiccup in your data scope that could cause that.

 

[mattKnight]

It sounds like you don't have an option 242 on the data scopes



Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.

 

[mikeg826]

as Kyle mentioned - add the vlantest=60 to the end of the scope, and it will reset to the native vlan and grab the new voice vlan.

>mike

ACE - IP Telephony