Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

9611G IP Phone 2

Status
Not open for further replies.

SupportDude

Technical User
Mar 1, 2006
1,667
US
Hello all,
I've never worked with this particular set model.
On the bottom of the 9611G there is a slide switch labeled IEEE.
One side of the switch is L and the other is H.
Can anybody provide any info about what this switch is for?

Thanks in advance!

-SD-
 
If you attach a BLF module then if set to L the BLF unit needs a separate power unit if set to H then the power is taken from PoE.

If it ain't dutch it ain't much
 
More exactly.

L means low power and allows one module attached.
H means high power and is needed for 2 or 3 modules.

It changes the allowed power consumption.


BAZINGA!

I'm not insane, my mother had me tested!

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top