9608G ethernet / PC ethernet speed setting

[plough]

Is there a way within the Manager to force a 9608G passthrough port to: Ethernet 1000Mbps full / PC Ethernet 1000Mbps full
It appears to go to auto- negotiate or a slower speed having to enter the Mute <password> # / INT to set the speed manually at the set, I would rather force it is possible.

Thanks in advance.

 

[gwebster]

You can force this through the 46xxsettings.txt file. HOWEVER, you should only fix the configuration of one end of an Ethernet link if the other end is also fixed. Having one end on auto-negotiate and the other end fixed will ALWAYS result in a half-duplex setup which WILL lead to audio quality issues and throughput issues.