Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

9310 w/ 9360 running ASC

Status
Not open for further replies.

TekAndy

Technical User
Mar 6, 2007
185
0
0
US
Hey All, is there a command through the OS or maybe the client port to get the serial numbers off of the tape drives that are attached? These are 9490's and the SN is on the front of the drives and we don't want to disrupt the operation. Thanks

Andy
 
Hi Andy,
I think the SSU in the 9490 will report the drive and card serial numbers in the 9490s
TE
 
I Concur.

Also, you can get the info from the operator panels on the rear of the transports if you can't be bothered attaching a laptop to the SSU.
 
Unfortunatly, the operator panel on the back of the transport only shows frame number and slot, not the actual serial number.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top