IPOtech111
Programmer
I am fairly certain the answer to my question is that it is not possible but thought I would check here anyway.
I have a non-select server edition 11.1 with a primary server and a secondary, no local IP500's. This is a campus environment with about 10 buildings, all J series phones that register back to the primary and use a SIP trunk on the primary.
I would like to have 911 calls made from building A only notify person A and 911 calls from building B only notify person B etc. Whether that is via the 911 View button on a phone or an email notification. As far as I can tell there is no way to break this out, if any phone on the server (from any building) places a 911 call it notifies every phone with the button. I do not see anything in locations to segment this.
Is there any way to accomplish this with just the IPO or do I need something like Xima Emergency notifications or RedSky?
I have a non-select server edition 11.1 with a primary server and a secondary, no local IP500's. This is a campus environment with about 10 buildings, all J series phones that register back to the primary and use a SIP trunk on the primary.
I would like to have 911 calls made from building A only notify person A and 911 calls from building B only notify person B etc. Whether that is via the 911 View button on a phone or an email notification. As far as I can tell there is no way to break this out, if any phone on the server (from any building) places a 911 call it notifies every phone with the button. I do not see anything in locations to segment this.
Is there any way to accomplish this with just the IPO or do I need something like Xima Emergency notifications or RedSky?