Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

911 issue from another System

Status
Not open for further replies.

saulick

Technical User
Oct 13, 2015
2
US
I have a CS1k on 7.5 supporting our Contact Center. We are implementing a Cisco back office system and I am trying to route calls from the Cisco system over the local PRIs connected to the Avaya PBX. The Cisco Call Manager is sending (for example) 8911 from the phones in one location. I have built a DSC in the PBX pointing to the local PRI striping off the 8 I receive from Cisco but it is not working. Any ideas?
 
How is the Cisco connected via T-1 or SIP trunks? Also have you ran a dchannel trace to capture the call and see what is being sent and received? If so post it as would be nice to see the call capture.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top