Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

8EXT

Status
Not open for further replies.

MikeyZ

MIS
Nov 10, 2004
2
CA
On incoming calls, the calling party number does not show up on two phones but shows up on all the others. I switched ports and determined that the phones are good. It appears to be the port or the system board. I shut the sytem down and waited for a couple minutes before restarting and the result is the same.
Also on this system - the door phone only rings on the main phone.
Any idea to fix the first problem and how to get the door phone to ring on all phones?
Thanks
 
Program 516 (Calling line id restriction - default All COS Disabled) &
Program 517 (Connected Line id restriction - default as above)
COS setting of extension is prog 601

door open cos is 511

door ring is 607 & 608 (day/night)

dave
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top