phonedudeSr
IS-IT--Management
I need to upgrade the firmware of a 8941. I am currently on a CUCM 9.x. Is there a link or does someone have the procedure to do this?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
8941 firmware upgrade
- Thread starter phonedudeSr
- Start date
- Status
gnrslash4life
MIS
The firmware you get from Cisco's website. To install it you upload it to the server on the OS Admin page via DVD or by running a sftp/ftp server.
- Thread starter
- #3
phonedudeSr
IS-IT--Management
Would I need to remove the old firmware first, then upload?
- Thread starter
- #4
phonedudeSr
IS-IT--Management
I downloaded the firmware files to my desktop, then manually installed it to the TFTP server running on my publisher. However, when I reboot the phone it continues to try and load the old ver. I have removes and replace the files in OS admin, is there another procedure that I need to perform?
- Status