8410 question

[sjs1717]

I know some of the early sets could hybrid. so .... a set works on a 4 wire card but not on a 2 wire card. Is this a release issue? or just the age of the set? The jacks all test out fine and the set works on the 4 wire card....not the 2 wire kind....unfortunately re wiring at the cabinet is not possible at this time.


Steve
We're doing this stuff for the wealth and fame right?

 

[4merAvaya]

All 84xx sets can work on either 2-wire (TN2181/TN2224) or 4-wire (TN754) boards.

Fo 2-wire operation, the port on the circuit pack has to be connected to the white/blue pair.

Kevin

https://support.avaya.com/css/P8/documents/003754516

 

[sjs1717]

I just spoke w/ the tech on this one...interesting details..... There is already an 8410 at the desired location. they are just trying to put a newer set in place...AND the newer set works on a 4 wire....just not on a two wire.....I was confused by the description of this problem before ... now I am just downright stumped.....could the pins inside the set be the issue?


Steve
We're doing this stuff for the wealth and fame right?

 

[wmainc]

I ran into the same problem for the first time after many years of hearing about it. Plug the new phone in and then do a simple "busy station" and then "release station".