Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

81c INI issue

Status
Not open for further replies.

amitde

Technical User
Feb 26, 2006
94
IN
Hi following I got from the pdt logs....

213 :(28/4/06 17:17:56.444) BERR705 EXC 1: Bus Error in Task "tSL1" (0x8d10fe0)
SR=0x3000, PC=0x5017aea, Addr=0x13122f80, SSW=0x850010
214 :(28/4/06 17:17:56.449) BERR700 EXCH: Threshold exceeded; vector=0x2, PC=0x5017aea, fault addr=0x13122f80
215 :(28/4/06 17:17:56.449) BERR700 EXCH: Threshold exceeded; vector=0x2, PC=0x5017aea, fault addr=0x13122f80
216 :(28/4/06 17:17:56.510) SRPT782 RST 1: WARM START IN PROGRESS - Reason 15
217 :(28/4/06 17:17:56.510) SRPT782 RST 1: WARM START IN PROGRESS - Reason 15
218 :(28/4/06 17:17:56.510) SRPT782 RST 1: WARM START IN PROGRESS - Reason 15


Its an 81c with rl 25.40B+

Thanks,
AD
 
There are several patches for 25.340b and Berr705 and INIs

Make sure you have the latest Deplist applied
 
also check the rls level of your cni cards, mine were older rls and caused the same problem,, and it was just one of the two that was older issue 11 cards

john poole
bellsouth business
columbia,sc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top