Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

80x80x18mm Fan for Socket 478 Processor - Where Can I Get One?

Status
Not open for further replies.
That fan can be replaced with any 80mm fan, as long as the fan has a 3 wire plug... even 25.4mm thick fans should work without any problem, as long as the RPM is within the range of the mainboard...

the first link that wolluf pointed to is for HeatSink&Fans (combo), but if you look further under the cooling options, you will find the FAN section...

here are a few links with fans that would work...
e.g.:

HiperFlow 80mm UV case fan with green frame and blades 80x80x15

Aluminum 8x2.5cm quiet case fan with TX3 connector

Quiet dual ball bearing 8cm case fan with TX3 Connector

Ben

"If it works don't fix it! If it doesn't use a sledgehammer..."

How to ask a question, when posting them to a professional forum.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top