Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

802.1X Pass-through

Status
Not open for further replies.
Vidmine

Vidmine

Technical User
Oct 2, 2008
100
US
I am running 6.3 with a 9611G running 6.8102 connected to a cisco switch.
The issue I am having is when the user disconnects their laptop from the phone and tries to connect in a conference room they get an unidentified network error. The issue is the phone is not releasing the users mac address. in talking to Cisco they are telling me the phone needs to be set for 802.1x pass through.
I checked the 46xxsettings and verified the DOT1X is set to 1 which is pass through enable
 
Sort by date Sort by votes
Do you have the following setting set on your cisco switches?
authentication mac-move permit
 
Upvote 0 Downvote
It might also be worth it to reboot the phone set and monitor it coming back up to make sure it is using the most current 46xxsettings file.
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top