insightbill
IS-IT--Management
How do I change the GS/LS card to be either loop or ground start? can you do this in WinSpm?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
800 GS/LS 1
- Thread starter insightbill
- Start date
- Status
-
1
- #2
tdaugirdas
Technical User
You can do it in WinSPM or from the operator phone. Press menu, system programming, start, lines/trunks, LS/GS/DS1, enter the slot# of the 800 GS/LS module (for example, 02), then choose "all loop" or "all ground", then press home to exit.
Tom Daugirdas,
President
STCG, Inc.
stcg.com
Tom Daugirdas,
President
STCG, Inc.
stcg.com
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question