8 Party Conference 1

[gilekele]

Hi Everyone,

What do I need to enable 8 or more party conferencing? What cards do I install and programming associated with it?
We use ips 2000. Any hints will be very much appreciated.

Thanks,

G!le.

 

[belevedere]

We will need a little more information. The early IPS software allowed for a 6 party CNF card and a second one brought it to 10 party, however it was a port hog using way too many ports in the system. Later software added a digital CNF card, which used a T-1 license. The basic system software allowed for 5 T-1/PRI cards. The T-1 CNF card has 32 ports for conferencing which can be sub-divided into 4 - 8 party, 2 - 8 party
+ 1 - 16 party, 2 - 16 party or 1 - 32 party conference circuits.
Check CMD F85>FF03 for software level, or log in with MatWorX and look at the top bar.
CFTC-A = digital CNF card

 

[gilekele]

I will check and let you know.
Thank you for the info belevedere. Much appreciated.

G!le.

 

[gilekele]

Here it is. CMD F85>FF031
I do not have T1 connection?

I am out of office at the moment so logged on remotely.Using MatWorX this are the cards I have in each of the PIMs.

PIM0 8dlc 8cot 8lc 8lc 8lc 8cot 8dlc 30prt MP(ipbx)

PIM1 8dlc 8cot 8lc 8lc 8lc 8lc 8lc 8lc 8lc

PIM2 8ic 8lc 8lc 8lc 8lc 8lc 8lc 8lc FP

PIM3 8lc 8lc 8lc 8lc 8lc 8lc 8lc

PIM4 8DLC 8lc 8lc 8lc IP-PAD 8lc 8lc FP

Looks like I do not have CNF card?

G!le.

 

[belevedere]

You have software version P1 = 3900. That is the latest and last version. You can add the digital conference card in any LT/AP slot since it is considered an application processor. It uses time slots from the CPU.

 

[gilekele]

Thank you so much for the info belevedere. I will do that once I find the card. Will let you posted on the progress. Much appreciated.

G!le.