Hi. I'm running a Cisco Callmanager, version 6.1.2.1000-13. I've got a problem with two 7935 conference phones mysteriously "de-registering" from the phone system.
In poking around, I see that other's have had similar problems, and that it might be due to the software load. When I checked, these phones are running ver 3.1(1.0), which Cisco doc's say is meant for CM release 4 and earlier. So I plan on installing ver 3.2 (19)
Cisco's release notes tell me how to upload the file to CM, but I have some questions since I've never done this before.
1) Is 3.2(19) a stable load?
2) Do I need to upload to both the publisher and subscriber? (I would think so)
3) If this load doesn't work, can I down-rev or am I SOL?
4) Is the software update automatic, or do I need to do something to "push" the load to the phones?
Any help would be appreciated.
In poking around, I see that other's have had similar problems, and that it might be due to the software load. When I checked, these phones are running ver 3.1(1.0), which Cisco doc's say is meant for CM release 4 and earlier. So I plan on installing ver 3.2 (19)
Cisco's release notes tell me how to upload the file to CM, but I have some questions since I've never done this before.
1) Is 3.2(19) a stable load?
2) Do I need to upload to both the publisher and subscriber? (I would think so)
3) If this load doesn't work, can I down-rev or am I SOL?
4) Is the software update automatic, or do I need to do something to "push" the load to the phones?
Any help would be appreciated.
![[americanflag]](/data/assets/smilies/americanflag.gif "[americanflag] [americanflag]")
Go Army!