775M Timeout Problem

[Voldemort]

Hi,

a Cisco 775M Router always disconnects BRI-Line after 30 Seconds, no matter what I set with the Timeout Parameter (OFF/360Secs)

Software is c760-in.rxd-NET3.44-4.bin, Provider is T-Online in Germany.

Anybody got a hint for me?

ThanX a lot!

Voldemort, Germany

 

[jeter]

why is it disconnecting ? Go into remotenet and (set timeout off ) and if you have unlimitted access ( set 1 pe on and set 2 pe on ). type sh at the regular prompt and see if there is a connection. I would also monitor the console
screen and watch the reports as to why the lines drop. Try this if all fails ( set default ) and start over. Good Luck !!! #-) Jeter@LasVegas.com Remember to pass Cisco's CCNA you need at least an 849 to pass!!!