davidallenstudios
Technical User
I just purchased a 7700 and every paper I have tried in the printer comes out wavy. I have used from 20 lb to 32 lb paper Is this normal for this printer.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
7700 Wavy Paper
- Thread starter davidallenstudios
- Start date
- Status
I don't know if it is true for you Xerox, but we had the same problem with 2 oki color printers. We found that if we turned them off at night, they would develop a flat spot on the fuser rollers which would curl the paper. we found by leaving trhem on 24/7, the problem went away.
The fuser in a Phaser 7700 consists of a roll against a belt, so it would be unlikely to have caused a flat spot. As a 7700 is now a fairly old model, I would suggest that the fuser may require replacement though. If the machine has done any more than 75-100,000 prints especially if most are colour a new fuser assembly would be the first step.
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question