7400B setup

[maxfone]

Customer (hotel) unbeknownst to us changed their pms system from the lucent computer network to another. New system requires two ports, one for call accting (which we got working ok) and the other for pms interface.
The call accounting is and was set up on X498 using a 8400B dataset. We have at our disposal a 7400B dataset to use for the pms interface, which is partially setup on X499.
We're not sure of how to configure the 7400, nor how to relate it's hardware port to a netcom port.
PLEASE help!

Thanks
maxfone

 

[mikeydidit]

display data-module xxxxx Page 1 of 2 SPE A
DATA MODULE

Data Extension: 53536 Name: REMOTE SAT BCC: 2
Type: data-line COS: 0
Port: 01C0306 COR: 1
ITC: restricted TN: 1 Connected To: dte


ABBREVIATED DIALING
List1:

SPECIAL DIALING OPTION:



ASSIGNED MEMBER ( Station with a data extension button for this data module )

Ext Name (first 26 characters)
1:

display data-modulexxxxx Page 2 of 2 SPE A
DATA MODULE

CAPABILITIES
KYBD Dialing? y Configuration? n
Busy Out? n
SPEEDS
Low? n 1200? n 4800? n 19200? n
300? n 2400? n 9600? y Autoadjust? n

OPTIONS
Permit Mismatch? n Dial Echoing? y
Disconnect Sequence: two-breaks Answer Text? y
Parity: even Connected Indication? y

This may be what you are looking for.


Mike Jones
LSUHSC