Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
7332 Autoloader on AIX433.
- Thread starter ckchia
- Start date
The general drivers for the adapter and tape should be with AIX...
The 7332 Tape Autoloader must be attached to a supported RS/6000 processor and
adapter with an AIX operating system at level 4.1.5 or higher. If the LVD/SE
adapter is used, the AIX operating system must be at level 4,2,3 or higher.
but you may also need Atape....which is located at:
ftp://ftp.software.ibm.com/storage/devdrvr/AIX
To use autoloading capability, install Atape device driver. for the 7332-220
(make sure you have latest updates and firmware)
The 7332-110 requires: SYSBACK or ADSM software to work with multiple
cartridge without human intervention.
The 7332 Tape Autoloader must be attached to a supported RS/6000 processor and
adapter with an AIX operating system at level 4.1.5 or higher. If the LVD/SE
adapter is used, the AIX operating system must be at level 4,2,3 or higher.
but you may also need Atape....which is located at:
ftp://ftp.software.ibm.com/storage/devdrvr/AIX
To use autoloading capability, install Atape device driver. for the 7332-220
(make sure you have latest updates and firmware)
The 7332-110 requires: SYSBACK or ADSM software to work with multiple
cartridge without human intervention.
- Status
Similar threads
- Question