I have a single set on a 75+ set system that decides to drop calls, reboot, whatever. I wanted to swap the phone with a known good set, yet keep the current extension. If the phone doesn't have set relocation turned on, will the new phone update to it's new extension? Is all extension information contained within the set or the "switch/ksu"?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
7310 set "reboots" on occasion 1
- Thread starter JessMeyer
- Start date
-
1
- #2
Set relocate is a system wide feature. If it`s set to yes, the ext moves with the phone. If its set to no the ext will remain at the jack. If you replace it with another 7310, it will keep its ext and button programming. If you replace it with another type, the ext will remain the same but programmable buttons will change. You may want to try moving the line cord around to see if it is just a defective cord, as is the case a majority of the time.
Schlum
Schlum
- Status
Similar threads
- Locked
- Question
