Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

7025-F50 & AIX 5.2

Status
Not open for further replies.

teqmem

Programmer
Nov 26, 2004
114
US
Hello,

Can a 7025-F50 hardware supports AIX 5.2 or higher?

Thank you.
 
yes, you can.

in rel notes to AIX 5.3 you can find that microcode level L04197 is required to run AIX 5.3 on 7025-F50

 
Hi

I agree - I installed 5.3 without an issue on a 7025-F50 before Christmas.

HTH


Kind Regards,
Matthew Bourne
"Find a job you love and never do a day's work in your life.
 
Thanks all.

I hope I can upgrade from 4.3.3 ML11 without any issue.
 
As long as you put new firmware on first you should have no problems going to 5.2 or 5.3.
Don't forget to do the adapter and device firmware / microcode while you are at it.


The "Microcode survey and update tools" link is worth a look.

You may find some of the devices in the F50 are not supported at AIX 5.2, they dropped some things like old ethernet and graphics cards.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top