*67 over PRI T-1

[bfitz8339]

Is there any way to have *67 over PRI T-1 work(*67 used to block caller ID). I have tried several times but it seems to have too many digits.

 

[MagnaRGP]

Change the lengths under dial plan (both default and prefix 1). Increase the current setting by 3 and you will be fine. Be warned that when you do it will increase the delay on dialing a call without the *67 by about 1 second though.

 

[edmonton2]

Name and number blocking for PRI
When activated, Feature 819 allows you to block the outgoing name and/or number on a per-call basis. Name and number blocking can be used with a Norstar or BST telephone, but not with an ISDN terminal.