6608 T1Cas Channel Configurartion

[Wavesg]

I have a 6608 T1 cas. I setup one port as Loopstart with a DN attendant. This connects to a 7200 PA-VXC-TE+ card using a DS0
logical Voice port, which maps to another router via a dial peer where the receiving divice connect to an FXS port. I have a route pattern in the callmanager with the DN number assigned
in the attendant configuration,pointing to the T1 cas port (ds0) 1. We are getting a bad signal off hook. On hook with get constant ring.

Stay cool; it’s not over yet!

 

[rtfmdude]

wavesg,

With the cas trunk on-hook, can you dial the destination extension and connect a call?

 

[Wavesg]

We figured it out. We had to adjust the timer on the E&M channel.

Stay cool; it’s not over yet!