Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

6513 with ws-x6148-45af showing not supported

Status
Not open for further replies.

bberryca

IS-IT--Management
Sep 2, 2009
18
CA
Hello,

I have bought a 6513 and one of the blades is a ws-x6148-45af its comming up "not supported" when i slot it. i've checked the IOS version and it says it need 12.1 min and i am running 12.2.

Here is a dump from the switch ( i've removed the sn's.. Sorry if thats a issue):

Router#show version
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(27b)E3, RELEASE SOFT
WARE (fc1)
Technical Support: Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Tue 07-Aug-07 10:01 by hqluong
Image text-base: 0x40008F90, data-base: 0x4185C000

ROM: System Bootstrap, Version 12.2(17r)S5, RELEASE SOFTWARE (fc1)
BOOTLDR: c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(27b)E3, RELEASE SOFT
WARE (fc1)

Router uptime is 4 hours, 52 minutes
Time since Router switched to active is 4 hours, 51 minutes
System returned to ROM by power-on (SP by power-on)
System image file is "sup-bootflash:c6sup22-psv-mz.121-27b.E3.bin"

cisco WS-C6513 (R7000) processor (revision 1.0) with 458752K/65536K bytes of mem
ory.
Processor board ID
R7000 CPU at 300Mhz, Implementation 39, Rev 2.1, 256KB L2, 1024KB L3 Cache
Last reset from power-on
X.25 software, Version 3.0.0.
Bridging software.
1 Virtual Ethernet/IEEE 802.3 interface(s)
576 FastEthernet/IEEE 802.3 interface(s)
4 Gigabit Ethernet/IEEE 802.3 interface(s)
381K bytes of non-volatile configuration memory.

32768K bytes of Flash internal SIMM (Sector size 512K).
Standby is up
Standby has 458752K/65536K bytes of memory.

Configuration register is 0x2102


Router#show mod
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-SUP2-2GE
2 2 Catalyst 6000 supervisor 2 (Standby) WS-X6K-SUP2-2GE
3 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45
4 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45
5 48 48-port 10/100 mb RJ45 WS-X6148-45AF
6 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45
7 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45
8 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45
9 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45
10 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45
11 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45
12 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45
13 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45

Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 00d0.c0d4.285c to 00d0.c0d4.285d 2.2 7.1(1) 12.1(27b)E3 Ok
2 0008.7dc9.f300 to 0008.7dc9.f301 4.3 7.1(1) 12.1(27b)E3 Ok
3 0009.1263.4ac8 to 0009.1263.4af7 6.1 5.4(2) 8.5(0.23)COS Ok
4 0004.6d41.e150 to 0004.6d41.e17f 1.4 5.4(2) 8.5(0.23)COS Ok
5 0014.69bf.e8b8 to 0014.69bf.e8e7 3.0 Unknown Unknown PwrDown
6 0004.6d43.2400 to 0004.6d43.242f 1.4 5.4(2) 8.5(0.23)COS Ok
7 000a.f45c.3490 to 000a.f45c.34bf 6.2 5.4(2) 8.5(0.23)COS Ok
8 0008.207d.1a6c to 0008.207d.1a9b 6.0 5.4(2) 8.5(0.23)COS Ok
9 0009.1263.4b58 to 0009.1263.4b87 6.1 5.4(2) 8.5(0.23)COS Ok
10 0003.6c17.2800 to 0003.6c17.282f 1.9 5.4(2) 8.5(0.23)COS Ok
11 0011.930a.fec0 to 0011.930a.feef 9.1 5.4(2) 8.5(0.23)COS Ok
12 0003.6c1a.8860 to 0003.6c1a.888f 1.4 5.4(2) 8.5(0.23)COS Ok
13 0005.7483.7428 to 0005.7483.7457 6.0 5.4(2) 8.5(0.23)COS Ok

Mod Sub-Module Model Serial Hw Status
--- --------------------------- --------------- --------------- ------- -------
1 Policy Feature Card 2 WS-F6K-PFC2 1.3 Ok
1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 1.2 Ok
2 Policy Feature Card 2 WS-F6K-PFC2 3.4 Ok
2 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 2.5 Ok
5 IEEE Voice Daughter Card WS-F6K-FE48-AF 1.5 PwrDown

Mod Online Diag Status
--- -------------------
1 Pass
2 Pass
3 Pass
4 Pass
5 Unknown
6 Pass
7 Pass
8 Pass
9 Pass
10 Pass
11 Pass
12 Pass
13 Pass

any help would be great appericated.

Regards,
Brad
 
Doesn't look like you are running 12.2 , sup-bootflash:c6sup22-psv-mz.121-27b.E3.bin. Usually it will indicate in the logs why it may have powered down the module , check there for any indication .
 
Yah its my IOS Version, and the Flash Size. I need to Get a 64mb Pcmcia Card and upgrade to 12.2

Thanks,
Brad
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top